Loading the Boarding Pass Printer Paper Roll

1.Insert the paper roll spindle into the core of the paper roll from the right side with the paper leading edge below the roll.

2.Place the paper roll spindle onto the printer cradle.

Note:  It is important that the leading edge of the paper is a clean cut and free from rips, tears, or adhesive. Jamming can occur if this is not followed. If necessary use the tear bar on top of the printer to clean the leading edge of the paper from rips, tears, or adhesive.

3.Route the paper edge under the green and black guides.

4.Evenly feed the leading edge of the paper into the printer until the auto feed picks up the paper. The paper is then automatically fed and trimmed.